Installing Ic Socket - Renesas H8/36902 User Manual

2.2.1

Installing IC Socket

After checking the location of pin 1 on the IC socket fasten it to the user system before soldering.
After confirming the location of pin 1 on the IC socket,
apply epoxy resin adhesive to the end of the four projections
at the bottom of the IC socket, and fasten it to the user
system.
Use the guide pins provided to determine where to install the IC socket, as shown in figure 3.
4 projections to apply
epoxy resin adhesive to
Bottom view of IC socket
After fastening, solder the IC socket for an FP-32A package to the user system.
6
CAUTION
User system
Figure 3 Location Setting of IC Socket
Guide pins
Pin 1
IC socket
(NQPACK032SA
manufactured by
Tokyo Eletech Corporation)