Table of Contents
Advertisement
6.2
M3S-KD32R
M3S-KD32R is the debugger software that controls the M3A-2195 SDI Interface Board from the
host PC.
6.2.1
Installing M3S-KD32R
[Notes for Windows 2000 / NT4.0]
Make sure that installer is executed by one who is authorized as an Administrator.
No one but the user who has the authority of an Administrator can install the M3S-KD32R.
(1) Run SETUP.EXE that is included in the Eng\Tool\Kd32r\W95E directory of the CD-ROM.
(2) Proceed to install M3S-KD32R following messages on the installation screen.
(3) When you finished installing M3S-KD32R, the dialog box shown in appears.
Figure 6.7 Dialog Box when Installation is Finished
(4) Case of using Windows 2000 / NT4.0, after M3S-KD32R is installed, reboot the PC.
REJ10B0224-0310/Rev.3.10
Starter Kit User's Manual M3A-2152
Mar. 2008
32176 Group
Page 21 of 83
Advertisement
Table of Contents
