Strymon TIMELINE User Manual page 22

TimeLine
- User Manual
Globals Menu (continued)
Bank Scroll:
EXP input mode:
Dry Signal:
Spillover:
Preset Names:
Sets the maximum bank number to scroll to.
BNK 1-99
Configures the EXP input to use an Expression Pedal, an external TAP footswitch, or
a Strymon MultiSwitch.
PEDAL - for use with Expression Pedal
- for use with external TAP footswitch, or MultiSwitch for tap and preset select
TAP
- for use with MultiSwitch to select preset banks
BANK
- for use with MultiSwitch to select presets
PRESET
- for use with MultiSwitch to control Looper functions
LOOPER
Please refer to the MultiSwitch user manual for detailed MultiSwitch setup
information: www.strymon.net/support/multiswitch
Turns the dry signal on or off. This is sometimes useful in a parallel effects loop
when an effect level is necessary.
NORMAL
- dry signal is muted allowing the MIX control to be used as an effect level
KILL
Allows the wet delay signal of a currently selected preset to "spill" into the
next selected preset. IMPORTANT: Because of the delay buffer architecture,
the current preset must be active for at least 5 seconds before spillover will be
operational.
OFF
ON
Enables or disables the display of preset names when displaying the current
bank. If set to ON or SCROLL, when incrementing through banks with the VALUE
encoder, the bank number will be displayed with 2 digits followed by the first 3
characters of the preset name.
OFF - bank numbers are displayed instead of preset names
ON - the first 6 characters of the preset name are displayed
- the preset name will scroll once completely through it's 16 characters
SCROLL
then settle on the first 6 characters
®
pg 22