Strymon TIMELINE User Manual page 15

TimeLine
- User Manual
Delay Machines: Trem
A delay with synchronized tremolo affecting the repeats. Selectable LFOs are provided for the tremolo waveshape.
PARAMETERS:
LFO (Low Frequency Oscillator):
Speed:
Depth:
High Pass:
The SAW mode at higher LFO SPEED (3:1, 4:1, etc) will create a high-impact 'plectrum' effect.
TIPS & TRICKS:
RAMP mode at lower lfo SPEED can create an interesting reverse envelope. Try SQUARE and SINE at higher LFO
SPEED for a traditionally-inspired new sound. Experiment with the MIX control in conjunction with the DEPTH
parameter to dial in the intensity.
TREM
Selects from a variety of LFO waveforms to control the trem
envelope of the delayed signal. For a choppy trem delay, choose the SQUARE lfo, or for
smoother sounds try the SINE waveform. A fast lfo speed with a SAW wave can create a
mandolin-like plectrum effect.
TRIANGLE
SQUARE
SINE
Controls the speed of the trem waveform in relationship to the Delay Time. When the
delay time is changed by adjusting the Delay TIME knob or with the TAP footswitch, the
lfo will track the change in delay time to stay in sync.
1/32
1/24 1/9
1/18 1/8
1/7
1/16
1/12 1/6
1/10 1/5
Selects the depth of the LFO waveform, with maximum setting resulting in no delay
volume when the lfo waveform is at it's lowest point.
OFF
|||||||||
Reduces the low frequency content of the wet signal after the delay. A useful
additional tone sculptor for delays on low-note riffs or chords where you want to
reduce booming in your rig.
OFF
20Hz
40Hz
60Hz
80Hz
100Hz
RAMP
SAW
1/4 1/1
1/3 4/3
1/2
3/2
2/3 5/2
3/4 3/1
120Hz 230Hz
140Hz 260Hz
160Hz 300Hz
180Hz 350Hz
200Hz 400Hz
7/2 8/1
4/1 9/1
5/1 10/1
6/1 12/1
7/1 16/1
500Hz
600Hz
700Hz
800Hz
900Hz
®
18/1
24/1
32/1
pg 15