Strymon TIMELINE User Manual page 11

TimeLine
- User Manual
Delay Machines: Reverse
An improvement on the classic reverse delay. The input signal triggers the delay so the reverse signal is always predictable,
musical and repeatable.
PARAMETERS:
Smear:
High Pass:
Try setting the TIME knob to around 500mS, and hold a ringing chord for an interesting rhythmic
TIPS & TRICKS:
effect. Experiment with the FILTER, GRIT and MOD knobs.
To keep your dry signal feeding into the reverse delay while effectively bypassed, assign an expression to control the
MIX knob. Assign the HEEL position to the MIX knob at minimum. Assign the TOE position to the desired wet mix on the
MIX knob. Rock the expression pedal all the way back to bypass the delay. Rock the pedal to the TOE position to hear
reverse repeats that have already been generating while the mix was at full dry.
REVERSE
Softens the attack of the repeats while maintaining full frequency response. This
allows for higher mix levels while keeping the delay out of the way of the dry
signal. With high Repeats levels, the delayed signal gets dreamy and ethereal.
OFF
|||||||||
Reduces the low frequency content of the wet signal after the delay. A useful
additional tone sculptor for delays on low-note riffs or chords where you want to
reduce booming in your rig.
OFF
20Hz
40Hz
60Hz
80Hz
100Hz
120Hz 230Hz
140Hz 260Hz
160Hz 300Hz
180Hz 350Hz
200Hz 400Hz
500Hz
600Hz
700Hz
800Hz
900Hz
®
pg 11