Strymon TIMELINE User Manual page 10

TimeLine
- User Manual
Delay Machines: Pattern
A delay with selectable repeat patterns that provide a wide range of sounds. Rhythmic, Ambient delays are easily achievable.
PARAMETERS:
Pattern:
Smear:
High Pass:
The more intricate patterns can be most effective when the input is simple or 'sparse'.
TIPS & TRICKS:
Pattern 16 is a sort of 'early reflection' pattern. Experiment with delay times around 200mS, lots of Repeats and the
SMEAR param at maximum to create reverb-like sounds. Add some MOD DEPTH at lower MOD SPEED and play with
the Filter and Grit knobs and HIPASS param to dial in the 'reverb' tone.
PATTERN
From simple ping-pong to rhythmic trances, the patterns can inspire new musical
ideas. The patterns will create a stereo field of delay taps when using both the L and R
outputs, but will sum to the mono output when the R output jack is unplugged.
1
2
3
4
5
6
Softens the attack of the repeats while maintaining full frequency response. This
allows for higher mix levels while keeping the delay out of the way of the dry
signal. With high Repeats levels, the delayed signal gets dreamy and ethereal.
OFF
|||||||||
Reduces the low frequency content of the wet signal after the delay. A useful
additional tone sculptor for delays on low-note riffs or chords where you want to
reduce booming in your rig.
OFF
20Hz
40Hz
60Hz
80Hz
100Hz
7 12
8 13
9 14
10 15
11 16
120Hz 230Hz
140Hz 260Hz
160Hz 300Hz
180Hz 350Hz
200Hz 400Hz
500Hz
600Hz
700Hz
800Hz
900Hz
®
pg 10