Strymon TIMELINE User Manual page 14

TimeLine
- User Manual
Delay Machines: Swell
A variable attack time delay that can swell into notes or chords. This can create atmosphere and ambience in a subtle and
stealthy manner.
PARAMETERS:
Rise Time:
Smear:
High Pass:
Set the RISE param to match the delay time for natural swell-meets-delay effects. Turn the MIX fully
TIPS & TRICKS:
CW for volume-pedal swell effects.
SWELL
Sets the time constant of the ramp input to the delay. The display indicates the
ramp time in seconds. Try setting the ramp time to about the same value as the
delay time for natural swell effects.
0.10
0.15
0.20
0.25
0.30
0.40
Softens the attack of the repeats while maintaining full frequency response. This
allows for higher mix levels while keeping the delay out of the way of the dry
signal. With high Repeats levels, the delayed signal gets dreamy and ethereal.
OFF
|||||||||
Reduces the low frequency content of the wet signal after the delay. A useful
additional tone sculptor for delays on low-note riffs or chords where you want to
reduce booming in your rig.
OFF
20Hz
40Hz
60Hz
80Hz
100Hz
0.50 1.00
0.60 1.10
0.70 1.20
0.80 1.30
0.90 1.40
120Hz 230Hz
140Hz 260Hz
160Hz 300Hz
180Hz 350Hz
200Hz 400Hz
1.50 2.00
1.60 2.20
1.70 2.40
1.80 2.60
1.90 2.80
500Hz
600Hz
700Hz
800Hz
900Hz
®
3.00
4.00
pg 14