Strymon TIMELINE User Manual page 21

TimeLine
- User Manual
Globals Menu
Global parameters affect TimeLine regardless of what preset is currently active.
Time Display:
Looper Location: Switches the Looper to be Pre or Post delay.
Looper Level:
Looper Exit:
Bypass Set-Up:
MIDI Channel:
MIDI Continuous Controllers: Turns MIDI CC messaging (continuous controllers) ON or OFF.
MIDI Patch Change: Turns MIDI patch change messaging ON or OFF.
MIDI Through:
Configures the display to show delay time in Milliseconds or Beats Per Minute.
MS
BPM
PRE
POST
Sets the volume level of the looper playback.
|||||||
Determines if the looper stops when exiting or keeps playing in the background.
PLAY
STOP
Changes the bypass mode between True Bypass and Buffered Bypass. In True
Bypass, electromechanical relays are used to bypass TimeLine so that no
components are touching the input signal. In Buffered Bypass the bypassed
signal runs through a high quality analog buffer.
TRUE BYPASS
BUFFERED BYPASS
Sets the MIDI Channel. Can be set to 1 - 16.
CH 1 - 16
ON
OFF
ON
OFF
When set to THRU, MIDI messages that arrive at the MIDI input are sent to the MIDI
output without ANY additional MIDI messages generated by TimeLine. When set
to MERGE, MIDI messages that arrive at the input and those that are generated by
TimeLine are merged together to be sent to the MIDI output. When set to OFF, only
MIDI messages generated by the controls on Timeline are sent to the MIDI output.
THRU
MERGE
OFF
®
pg 21