Updating Vlpro Server Jar File; Figure 8-2 : Vistalink; Figure 8-3 : Vistalink; Pro - Version Information Window - evertz 7700 MultiFrame User Manual

7700/7800 MultiFrame Manual
7700/7800 MultiFrame

Figure 8-2 : VistaLINK

Check the Upgrade checkbox for all modules that require the firmware upgrade. Press Upgrade button.
This will open a new Upgrade Firmware window. Press the Browse button to navigate to the firmware
archive provided for upgrading the 7800DA2T modules (File extension is .bin). Once the correct file has
been selected, press the Start button to begin the upgrade process.
After the firmware has been transmitted to the 7800DA2T module successfully, the module will reboot to
complete the firmware
Version Information window.
Once the cards have rebooted, ensure all 7800DA2T modules are still present in the VistaLINK
hardware tree. Right click on 7700FR/7800FR frame that contains the 7800DA2T modules and select
Version Information. Navigate the hardware tree on the left side of the version information window to
select the 7800DA2T module listed. The list on the right side of the window should populate with all
7800DA2T modules present in the 7700FR/7800FR.

NOTE: If any of the 7800DA2T modules do not properly upgrade the firmware, please
power-cycle those boards and retry the procedure exclusively on the failed boards. If the
issue still persists, contact Evertz for further assistance.

updating vlpro server jar file

Page - 22

Figure 8-3 : VistaLINK

upgrade process.

PRO - Version Information Window

®

PRO - Upgrade Firmware Window

®
Close the
Revision 1.0
Upgrade Firmware window and
PRO
®