Table of Contents
Advertisement
Telemetry Gateway A850 User Manual
What Is the ADCON System?
The ADCON system consists of the following components:
•
•
•
•
System Components
The remote station consists of a transmitter (remote telemetry unit, RTU), its
sensors and accessory parts (e.g. antennas, cables, masts).
The measured values are saved in the memory of the Remote Telemetry Unit.
The base station consists of a Telemetry Gateway (or receiver), a computer
(and/or server) and a wireless modem.
The data is transmitted from the RTUs via a communication device to the
Telemetry Gateway for analysis and further use.
The addVANTAGE software receives and saves the data from one or more
Telemetry Gateways and provides this data for calculations and visualization in
the addVANTAGE Pro software.
Target Group
This User Manual is intended for the following target groups:
•
•
•
This User Manual describes the functions available to users as well as
configurations that are intended only for (system) administrators.
Remote station as transmitter:
One or more remote telemetry units (RTUs) – e.g. A723, A75x UHF,
A75xGPRS/UMTS, A76x GPRS/UMTS/LTE
Base station as receiver and for data communication:
Telemetry Gateway
Method of communication used to access the telemetry devices:
GPRS modem or wireless (radio) modem (e.g. A440 with cable connection
or RA440 with internet connection)
Data acquisition and control software:
addVANTAGE Pro
Figure 1. The ADCON Telemetry System
System administrators who configure the Telemetry Gateway
Administrators who operate the RTU network and assign user rights
Users who use the telemetry system, poll RTUs and sensors and configure
settings for which they have permission
CHAPTER 1
What Is the ADCON System?
8
Advertisement
Table of Contents
