Telemetry Gateway A850 User Manual
Location Settings
On this tab you can configure settings for the location of the RTU. You can adjust
the position via GPS or by positioning it on the map.
Maintenance
On this tab you can create log entries to define service tasks for the RTU. For
example, Battery replaced, station cleaned
On this tab you can set up routes for the UHF RTUs.
Note
To configure specific advanced settings (e.g. routing), ADCON offers training on
the system. For additional information, contact our Customer Service
representatives - see
Figure 39. RTU settings, location
,
Figure 40. RTU settings, maintenance
,
Figure 41. RTU settings, routing
"Customer Service" on page
CHAPTER 5
Adding an RTU Group
9.
42