Table of Contents
Advertisement
Telemetry Gateway A850 User Manual
Launching the Configurator
The web interface facilitates communication with the Telemetry Gateway via any
web browser. With the configurator you can view and adjust basic settings for
the Telemetry Gateway, obtain additional information and support, and access
the Telemetry Gateway GUI.
Prerequisites
•
•
•
•
•
Logging onto the Telemetry Gateway
1.
2.
Note
For dates to be valid, it is important that the Telemetry Gateway is synchronized
with the time server – see
3.
Note
Create a backup before making changes with the configurator. You can restore
the data in case errors are made during configuration.
4.
5.
Note
If the web application does not start, check whether Java is installed on your
computer and enabled in your browser. Contact your system administrator.
6.
Java: version 8 or higher, 64-bit version recommended
Stable internet or network connection
Web browser: Mozilla Firefox recommended
A850: FW 3.7.1 or higher
Optional: 7-Zip
Launch your browser and enter the server URL.
The default address of the ADCON Telemetry Gateway is: 192.168.1.1
The web interface welcome page opens.
Figure 7. Configurator welcome page
Check the date and time on the top right of the welcome page.
"Troubleshooting" on page
Click on Device Status and check if the latest firmware is installed.
Click on Launch Configurator to access the Telemetry Gateway graphical
user interface.
You will be prompted to open or save the JNLP file. By default the file is
saved under "Downloads". Double-click on the file there to run it.
When launching the application for the first time, a Java Virtual Machine
security warning will appear. Select the checkbox if you do not want to see
this warning again. Run the application.
Figure 8. Running the JAVA application
CHAPTER 3
Installation
54.
20
Advertisement
Table of Contents
