Table of Contents
Advertisement
Telemetry Gateway A850 User Manual
Create a log file for your system. You can filter, display and save one, multiple or
all system logs.
Note
Depending on the log level set, general information is provided (standard) or
detailed information (debug) is displayed. You can set the log level via the
welcome page of the Telemetry Gateway. The default value is "Standard".
Customizing Network Settings
Customize the network addresses in the following areas (see
(root)" on page
•
•
•
Note
Logging on as "root" is necessary in order to customize these settings.
Logging on as "admin" is necessary in order to check these settings.
1.
2.
3.
4.
Save the configuration or cancel the action.
Log Monitor
There are three options available for displaying the system log files. For each
modem you can either log all actions or only the failed actions.
Call Journal
Shows the connection information such as the start and end date and any error
codes for GPRS/UMTS/LTE RTUs.
Poll Journal
Shows data transfer information such as start and end time, quantity of data
and information on transmissions between the A850 Telemetry Gateway and
each RTU.
FOTA Journal
Shows information about the firmware upgrades handled by FOTA.
47):
LAN settings
Console settings
DNS settings
Figure 56. Customizing network settings
Lock the configurator for editing.
Click on the Networking tab on the tab bar.
Configure the desired settings.
Confirm with OK.
51
CHAPTER 6
Log Monitor
"Networking
Advertisement
Table of Contents
