Telemetry Gateway A850 User Manual
Activating a Modem for the RTU
Activate the modem so that you can assign it to an RTU group.
1.
2.
3.
4.
5.
Launching the RTU Wizard
The RTU Wizard guides you through the process of installing a new RTU.
Note
You can also configure or change all settings (except for RTU type) later in the
graphical user interface.
1.
2.
3.
4.
Note
Entering the name and RTU ID is mandatory (red border).
5.
6.
7.
Figure 32. Activating a modem
Lock the configurator for editing.
Click on the RTUs tab on the tab bar.
Navigate in Explorer to the desired RTU group.
In the data window select the Allowed Modems tab.
Select the modems that should be available in this RTU group.
Figure 33. Creating a New RTU
Lock the configurator for editing.
Navigate in Explorer to the desired RTU group.
Right-click with the mouse to open the context menu.
In the context menu click on Start RTU Wizard. A popup window opens
where you can create the new RTU.
Enter a name for the new RTU group.
Enter the RTU ID (see "Basic" tab).
Enter the serial number to make management of RTUs easier (see
"Advanced Settings").
39
CHAPTER 5
Adding an RTU Group