Upgrade Via The Web Interface; Upgrade Via The Computer And Usb - Adcon A850 User Manual

Telemetry Gateway A850 User Manual

Upgrade via the Web Interface

If you are not connected to the internet, perform the upgrade offline.
1.
2.
3.
4.
5.

Upgrade via the Computer and USB

A USB port is available if you want to upgrade using the computer.
Note Delete outdated image files before restarting.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Press ESC twice to return to the main menu.
11. In the main menu select R to restart the Telemetry Gateway.
12. Confirm with Yes.
13. While rebooting, the firmware is updated and the configuration is adapted
Click on Upload A850 Firmware to install the latest device software on
your Telemetry Gateway.
Click on Search and select the locally saved firmware files one after
another.
Click on "Upload A850 Firmware" to install the latest device software on
your Telemetry Gateway.
Make sure you have selected the right files so that you don't accidentally
downgrade the device.
Reboot the system.
Copy all firmware files to a USB stick.
Plug the USB stick into the Telemetry Gateway USB port.
Connect the computer to the Telemetry Gateway via Telnet (Putty) or serial
console (TeraTerm).
Log in as the system administrator (root).
In the main menu select U to upgrade the Telemetry Gateway.
In the "Upgrade Menu" submenu select U to upload a firmware image.
In the "Upgrade Upload Menu" select U to access the USB storage.
Select 0 to select all files.
Make sure you have selected the right files so that you don't accidentally
downgrade the device.
to the new features.
53
CHAPTER 7
Firmware Upgrade