28
Telemetry Gateway A850 User Manual
CHAPTER 4
Using the Popup Context Menu
Context Menu for RTUs
The RTU context menu lets you select and perform all actions related to the
RTUs.
Right-click with your mouse on an RTU in Explorer to open the associated
context menu.
Figure 19. Context menu, RTU
Open Direct Command Terminal
Transmits directly entered commands to an RTU or modem and receives the
device's response. The direct commands are carried out over the command line
interface. The available options depend on the user permissions.
View Call Journal
Displays a list of incoming GPRS connections. The number of entries per RTU
depends on the number of RTUs and the online time of the A850 Telemetry
Gateway. After rebooting, all logs are cleared with the exception of FOTA
journals if "Log FOTA Messages persistent" was selected.
View Poll Journal
Displays a list with values for cyclic data acquisition and analysis of an RTU.
View FOTA Journal
GPRS/UMTS/
Displays a list of software updates to be carried out for an RTU via
LTE
, but not via UHF or wireless RTUs. It is possible to configure it so that all
stored FOTA entries persist (persistent FOTA journal).
View Data
Opens a list with all sensor values assigned to the RTU (as a table and image).
The start time and number of displayed values can be set. By default up to 100
entries started
24 hours beforehand are displayed.
Ping RTU
The ping shows the current status of the RTU and the connection. If a ping
cannot be made successfully, a related error message is displayed in a dialog
box.