Poll Rtu; Send Configuration To Rtu; Apply Profile; Queue Commands - Adcon A850 User Manual

29
Telemetry Gateway A850 User Manual CHAPTER 4
Using the Popup Context Menu

Poll RTU

Manually starts a data polling for an RTU.

Send Configuration to RTU

Sends the entire RTU configuration to the RTU, for example when the RTU is
replaced in the field.
If the configuration changes, the relevant configuration changes are transferred
automatically from the Telemetry Gateway to the RTU.

Apply Profile

Applies a selected profile to an RTU.

Queue Commands

Applies predefined commands, such as read back status, send commands, etc.

Copy RTU

Copies an RTU. If several RTUs of the same type are used, a fully pre-configured
RTU can serve as a template.

Change Type of RTU

Changes the RTU type. With this action, an existing RTU is converted to a
different RTU type without having to re-enter all configuration settings. The
prerequisite is that the information is compatible. The security question has to
be confirmed before changes can be made. It is only possible to migrate to a
newer or compatible new RTU type.

Save as Template

Saves the settings of an RTU as an XML template so that this RTU can be used
as a template. This only works on the same A850 configuration.

Connect Sensor

Assigns an RTU sensor to the I/O ports. The selected sensors are assigned to the
respective ports in the main window Explorer and are displayed.

Reload Data

Deletes the data on the Telemetry Gateway and loads the current data of an
RTU.

Import RTU Data

Note For this action the RTU must be configured as inactive.
Imports the data of an RTU as a file. The data that was previously read out from
an RTU is manually imported, for example, when the RTU is no longer
transmitting.

Import Sensor Data

Imports the sensor data as RTU data.

Delete RTU

Deletes an RTU and all connected sensors and data.

Delete Sensors

Deletes the connected sensors and data.