Adding Gprs Modems; Adding Wireless Modems - Adcon A850 User Manual

Telemetry Gateway A850 User Manual

Adding GPRS Modems

Note An internet connection is required in order to set up GPRS modems.
1.
2.
3.
4.
5.
Note If all FOTA entries should be stored long term, select "Log FOTA Messages per-
sistent".
6.
7.

Adding Wireless Modems

1.
2.
3.
4.
5.
6.
Figure 29. Adding GPRS Modems
Lock the configurator for editing.
Click on the Modems tab on the tab bar. A popup window opens with the
available types of modems.
On the right side next to the desired modem type, click on Create a new
entry. A new line is added.
Click in the gray line and type in a name for the GPRS modem. For
example,
GPRS-Port-9142
In the data panel at right configure the required settings for the modem.
Enter the port number under "GPRS Port". For example,
Check if the modem can be accessed by
on the GPRS modem port. The gateway responds with a query for
authentication. Alternatively, you can use a browser. This authentication
process can take up to 1 minute.
Save the configuration or cancel the action.
Figure 30. Adding wireless modems
Lock the configurator for editing.
Click on the Modems tab on the tab bar. A popup window opens with the
available types of modems.
On the right side next to the desired modem type, click on Create a new
entry. A popup window opens where modem data can be entered.
Enter the code for the wireless modem. You can find it on the wireless
modem nameplate.
Select the modem type.
Enter the connection for the wireless modem. For an A440 with a cable
connection, select device:A440. If it is an RA440, first configure the GPRS
part of the RA440 and then select the GPRS name.
Setting up Modems
9142
establishing a Telnet connection
37
CHAPTER 5