Table of Contents
Advertisement
Telemetry Gateway A850 User Manual
User roles
•
•
•
Networking (root)
You can set the gateway network parameters on the Networking tab – see
"Customizing Network Settings" on page
The following settings options are available:
•
•
•
•
Jobs (root)
Actions that have been run and scheduled are listed on the Jobs tab.
The following job information is available:
•
•
•
•
Note
When you click on a row, additional settings related to the job appear.
PPP Dialup (Point-to-Point Protocol)
Manages the PPP internet connection. PPP dialup refers to a network connection
to the internet or to a PPP server which is established using a dialup modem.
Root - can change all system settings
Administrator - can add users and change RTU settings.
This user has read only rights for system settings
User - can change RTU settings
Figure 48. Networking
Basic Settings - information about the mode and name of the A850
Telemetry Gateway in your network
LAN Settings - enter the addresses and settings for a LAN network
Console Settings - specify the IP addresses for access to your console via
the network
DNS Settings
•
Primary DNS Server - available primary server
•
Secondary DNS Server - available alternative server
Name - type of job
Last Result - status of establishing contact
Last Run - time when the last contact took place
Last Run - time the next contact should take place
51.
Figure 49. Jobs
47
CHAPTER 6
Configurator
Advertisement
Table of Contents
