Power Up Settings; Specifying Custom Settings - ZOLL 330 Operator's Manual

Using the Aspirator User Interface
Turn the Dial to highlight Alarm Config, and then press the Confirm button.
2.
Immediately, PM Due is highlighted. To turn the alarm OFF, press the Confirm button, use
3.
the Dial to select OFF, then press the Confirm button. The alarm is now OFF for this use.
To turn OFF the RTC Battery Low alarm, use the Dial to select RTC Battery Low, then press
4.
the Confirm button, use the Dial to select OFF, then press the Confirm button. The alarm is
now OFF for this use.

Power Up Settings

The initial starting configuration is described in, "Initial Power ON and Operation" found
previously in this chapter. However, you can configure how the aspirator starts (powers up)
based on your use or patient population. The aspirator Power Up setting options include:
Power Up Option
Adult
Pediatric
Custom
Start Menu
In addition to controlling how the device starts, the Power Up settings sub-menu also allows the
user to save the current device configuration for use as the Custom starting configuration and
which language will be used when the device starts.
To configure new power-up settings, follow these steps;
1. Press the Main Menu button to display the menu.
Turn the Dial to highlight Power Up settings, then press the Confirm button.
2.
If needed, turn the Dial to highlight the Power Up choice, then press the Confirm button
3.
which then presents the sub-menu where Power Up is highlighted.
Press the Confirm button, then turn the Dial to the desired starting configuration.
4.
Press the Confirm button to confirm the new starting configuration.
5.

Specifying Custom Settings

To save the current configuration for use at start up, follow these steps:
1. Press the Main Menu button, then turn the Dial to Power Up settings, then press the
Confirm button.
Turn the Dial to highlight the Custom Setting choice, and then press the Confirm button
2.
which confirms the selection and returns the highlight to the Power Up setting sub-menu.
4-12
Aspirator State on Power Up
Continuous mode with Adult initial settings for procedures (Surgical
Pharyngeal, Tracheal, CASS), and Smart Flow ON.
Continuous mode with Pediatric initial settings for Procedures (Surgical
Pharyngeal, Tracheal, CASS), and Smart Flow ON.
Allows the user to customize Continuous and Intermittent mode parameter
settings, including initial settings, and which mode is active when the device
starts.
Aspirator starts with the Start Menu displayed allowing the user to choose
between Adult, Pediatric, Custom setting, or the Last Settings
Adult
•
Pediatric
•
Custom
•
Start Menu
•
www.zoll.com 906-0330-01-01 Rev. D