ZOLL 330 Operator's Manual page 22

Product Overview
Controls consist of the following (refer to the figure above for control location).
Figure Call-Out
2-4
Control or Indicator
1 Power On/Off switch
2 Parameter buttons
3 Main Menu button
4 Encoder Dial (Dial)
5 Mute/Cancel button
6 Confirm button
7 Standby button
8 LCD display
9 LED array
www.zoll.com
Function
Turns the device on and off
Provides parameter selection and control
Displays the main menu
Changes the value of the highlighted parameter
Mutes audible alarm indicators, cancels
parameter entries, and exists menus
Confirms (accepts) parameter value entries, pop
up conditions, or menu selections
Enable or disable Standby Mode
Displays menus and messages
Indicates device status and alarm conditions
lighting red, yellow, or green LEDs
906-0330-01-01 Rev. D