Subscribe to Our Youtube Channel
Related Manuals for Premier Mounts ECM-D70T
Summary of Contents for Premier Mounts ECM-D70T
- Page 1 ECM-D70T / ECM-D70T1.5 Installation Guide www.mounts.com | North America 800.368.9700 | International +1-714-632-7100 1321 S. State College Blvd., Fullerton, CA 92831 USA...
-
Page 2: Weight Capacity
TION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAU-... -
Page 3: Included Components
Features: The ECM-D70T / ECM-D70T1.5 ceiling mount fits dual flat-panels up to 50” in either portrait or landscape orientation. It offer dynamic viewing with 360° swivel and 15° of tilt. The mount’s ultra-thin design keep s the center of gravity close to the flat-panels for better balance. Integrated cable management keeps the installation clean and organized. - Page 4 The coupler must be threaded onto the NPT threaded pipe ECM-D70T a minimum of four (4) complete turns. Once the ECM-D70T has been firmly threaded to the 1 1/2” or 2” NPT threaded pipe, use a screwdriver to tighten the Phillips screw on the thread coupler.
-
Page 5: Selecting The Mounting Hardware
ECM-D70T / ECM-D70T1.5 Installation Guide Selecting the Mounting Hardware Insert a small straw or toothpick into the threaded inserts found on the back of the flat-panel. Use a pencil to mark the depth of the threaded insert on the small straw or toothpick. -
Page 6: Griplate™ Washer Installation
Flat Panel Nylon Spacer Installation Nylon Spacer Premier Mounts’ nylon spacers allow you to attach the mounting Mount Point bracket to flat-panels which have recessed or uneven mount points. Each nylon spacer will add distance between the mounting bracket and your flat-panel. -
Page 7: Flat-Panel Installation
Elliptical Mounting Bar Lower and center the mounting bracket arms with the attached flat-panel onto the elliptical mounting bar of the ECM-D70T. Do not release the flat-panel until the mounting bracket arms are resting fully on the elliptical mounting bar. - Page 8 ECM-D70T / ECM-D70T1.5 Installation Guide Attaching Decorative Covers When attaching the decorative covers, verify the direction of the covers. The smaller mounting hole should be in position above the larger mounting hole. Mounting 1) Place the first decorative cover over the first mounting bracket Bracket arm and push firmly into place.
- Page 9 ECM-D70T / ECM-D70T1.5 Installation Guide Tilting Positioning Adjust the Flat Panel Friction Tilt Angle Adjust the Flat Panel to the Original Position 1) Place one hand at the center top edge of the flat-panel. 1) Place one hand at the center top edge of the flat panel.
- Page 10 Premier Mounts intends to make this manual accurate and complete. However, Premier Mounts makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Need help?
Do you have a question about the ECM-D70T and is the answer not in the manual?
Questions and answers