Advertisement
Parts List
ECM-MAC2 (Qty 1)
•
If you are using an ECM-3763S mount, continue below.
•
If you are using an ECM-3763D, ECM-3763T or ECM-3763Q mount, go to page 2.
ECM-3763S Installation
1) Remove the mounting bracket from the packaging.
2) Align the adjustable mounting slots of the ECM-
MAC2 with the fixed mounting holes on the ECM-
3763S.
3) Insert four (4) M6 x 12mm Phillips screws and tighten
using a screwdriver.
The ECM-3763S has six (6) mounting points. Either
the upper two or the bottom two rows must be
used depending on where the ECM-MAC2 is to be
mounted.
Go to Placing the Mac mini™ on page 2.
Page 1
CREATING POSITIVE CUSTOMER EXPERIENCES
INSTALLATION INSTRUCTIONS
Mac mini™ Mounting Bracket
Model: ECM-MAC2
M6 x 12 Phillips
Head Screw (Qty 4)
Upper Mounting
Points
Center
Mounting Points
Lower Mounting
Points
ECM-3763S
ECM-MAC2
9533-007-084-00
Visit the Premier Mounts website at http://www.mounts.com
ECM-3763S
Center
Mounting Point
ECM-MAC2
M6 x 12mm
Phillips Screw
Adjustable
Mounting Slot
Screwdriver
ECM-MAC2
Installation Instructions
Advertisement
Table of Contents
Related Manuals for Premier Mounts ECM-MAC2
Summary of Contents for Premier Mounts ECM-MAC2
- Page 1 ECM-MAC2 The ECM-3763S has six (6) mounting points. Either the upper two or the bottom two rows must be used depending on where the ECM-MAC2 is to be mounted. Go to Placing the Mac mini™ on page 2. Upper Mounting...
- Page 2 Screw Screwdriver Fixed Mounting Hole Placing the Mac mini™ 1) Place the Mac mini™ in the ECM-MAC2. 2) Route all cables at this time. Please refer to the instructions that came packaged with the Mac mini™ for further assistance. Mac mini™...
Need help?
Do you have a question about the ECM-MAC2 and is the answer not in the manual?
Questions and answers