Related Manuals for Premier Mounts AM500-U
Summary of Contents for Premier Mounts AM500-U
- Page 1 AM500-U Installation Guide www.mounts.com | North America 800.368.9700 | International +1-714-632-7100 2620 Palisades Drive,Corona, CA 92882 USA...
-
Page 2: Required For Installation
AM500-U Maximum Flat Panel Weight: 500 lb. / 226.79 kg. Installation Guide Included Components Wall Mount Bracket Cross Bar (Qty 1) (Qty 2) (Qty 1) 5/16” Flat Washers Universal Spacers Griplate™ Universal Washer 5/16” x 3” Lag Bolts Finned Anchors... -
Page 3: Wood Stud Installation
AM500-U Installation Guide Wood Stud Installation 1) Place the template over the wall. Use a stud finder to determine the center of wall studs in 2) Level the template. the vicinity of the mount. 3) Tape the template to the wall. -
Page 4: Concrete Wall Installation
AM500-U Installation Guide Concrete Wall Installation 1) Remove the template. 1) Place the template over the wall. 2) Place the wall mount over the pilot holes. 2) Level the template. 3) Insert one (1) lag bolt and one (1) washer into each pilot hole. - Page 5 AM500-U Installation Guide Insert the lag bolts and washer into the Finned Anchors. Tighten all Remove the two (2) M6 x 12 mm screws from the Cross Bar. lag bolts using a socket wrench and 1/2” or 13mm socket. Locate the arrow on the Cross Bar and install the brackets 1) Slide the brackets into the Cross Bar.
- Page 6 AM500-U Installation Guide M8 screws Griplate™ Universal Washer Universal Spacers (Optional) Align the brackets to the display mounting holes. Use four (4) M8 screws, four (4) Griplate™ Universal Washer. Use Universal Spacers if necessary. M8 x 10mm Set Screws Center the cross bar to the display and install four (4) M8 x 10 mm set screws using the 5/32” Allen Key to secure the brackets.
- Page 7 AM500-U Installation Guide Rotational Bracket Your orientation can be changed by switching your Rotational Bracket on the receiver. Remove the 6mm safety knob screw and set it aside. Two or Three person is recommended for this step. Lift the cross bar and place it into the receiver.
- Page 8 AM500-U Installation Guide Once the cross bar is fully seated in the receiver reinstalled Remove the plastic caps. the 6mm safety knob screw removed from step 15. Power and signal cables can run through the mount. The screws on the receiver head of the mount can be adjusted to add or subtract the tension of the rotation.
- Page 9 AM500-U Installation Guide Use 6mm Allen Key for tilt adjustments. Use 2.5mm for leveling adjustments. www.mounts.com | North America 800.368.9700 | International +1-714-632-7100 Page 9...
- Page 10 Premier Mounts intends to make this manual accurate and complete. However, Premier Mounts makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Need help?
Do you have a question about the AM500-U and is the answer not in the manual?
Questions and answers