Related Manuals for Premier Mounts CMF
Summary of Contents for Premier Mounts CMF
- Page 1 Low-Profile Cable Mount for Flat-Panels up to 55” INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9531-058-001-00...
-
Page 2: Table Of Contents
PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY... -
Page 3: Installation Tools
Phillips Tip Screwdriver Tape Measure Hammer Parts List Make sure none of the Premier Mounts parts are missing and/or damaged before beginning installation. If there are, stop the installation and call Premier Mounts at (800) 368-9700. CMF Components #10 x 1¾"... -
Page 4: Features
Features Premier Mounts’ Low-Profile Cable Mount for Flat-Panels up to 55" (CMF) makes installing a flat-panel as simple as hanging a picture frame. The CMF’s slim design and patent-pending magnetically assisted installation feature, MagnaGuide®, makes it the ideal flat-panel accessory for fast and simple installations. This cable mount easily installs on a single stud and to hold flat-panel displays up to 55”, or up to 65 lbs with a 200 ×... -
Page 5: Installing The Mount Sliding Plate To A Wood Stud
(Figure 4). Do not overtighten the wood screws. Go to the “Attaching the Bolt Spindles to the Flat- Panel” section on page 6. Figure 2 Figure 3 Figure 4 Installation Instructions Page 5 Visit the Premier Mounts website at http://www.premiermounts.com... - Page 6 Attach the two (2) loose bolt spindles to the bottom two (2) mounting locations on the back of the flat-panel (Figure 5). Continue on page 7. Figure 3 Lever Back view of cable mounting plate Figure 4 Figure 5 Page 6 Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com...
- Page 7 Slide the flat-panel and cable mounting plate into the mount sliding plate on the wall (Figure 1). At least two qualified persons are needed to perform this step. Use the CMF’s MagnaGuide™ feature to easily align the plates together. ➋ Use the M5 security Allen wrench and pre-installed M5 x 16mm security screw to secure the cable mounting plate to the mount sliding plate (Figure 2).
-
Page 8: Using The Kickstand
Kick Stand Side view of flat-panel and bolt spindles Technical Specifications All measurements are in inches [millimeters]. 1.28 3.52 32.43 89.39 14.58 19.69 SET AT 24" 3.52 89.39 6.09 154.80 Page 8 Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com... -
Page 9: Warranty
What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs.
Need help?
Do you have a question about the CMF and is the answer not in the manual?
Questions and answers