Warranty ................................- 11 - Warning Statements PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY...
This wall mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700). Mounting...
Page 4
(Qty 6) M4 x 16 M8 x 20 (Qty 6) (Qty 6) M4 x 25 (Qty 6) M8 x 25 (Qty 6) M5 x 12 M8 x 30 (Qty 6) (Qty 6) M5 x 16 (Qty 6) M5 x 20 (Qty 6) M8 x 35 (Qty 6)
Page 5
Nylon spacers and flat washers The nylon spacers may be stacked to achieve proper spacing. " Nylon Spacers " Nylon Spacers ( Qty 8) ( Large) (Qty 6) " Nylon Sleeves (Qty 8) " Nylon Spacers ( Large) (Qty 8) "...
Step 2 Step 1 Step 3 Determine where to mount the FM3. Use Once all of the studs have been located, use Using a 1/4” drill bit, drill a pilot hole at a stud finder to find the exact center of a pencil to mark the spots.
Page 7
Thread Depth Indicator Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it. Locate the correct diameter screw for the thread insert. Compare your marking to the screws (supplied). If your selected screw is longer than the marking on the thread depth indicator, DO NOT USE this screw.
Mounting Bracket Installation To ensure optimal installation, this kit includes various screws of different diameters and lengths. Step 1. Place your flat panel screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display.
FM3 Installation Two people are required for this step. MAKE SURE THE LOCKING SECURITY BRACKET SCREW IS FLUSH WITH THE SECURITY SCREW TAB BEFORE INSTALLATION (STEP 2). Step 1. To complete the installation of your new display mount, carefully place the flat panel brackets over the upper and lower mounting lips.
What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs.
Need help?
Do you have a question about the FM3 and is the answer not in the manual?
Questions and answers