Related Manuals for Premier Mounts ECM-D70T
Summary of Contents for Premier Mounts ECM-D70T
- Page 1 ECM-D70T / ECM-D70T1.5 Elliptical Ceiling Dual Mount for 37˝ to 50˝ Flat Panels INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9531-041-001-01...
-
Page 2: Table Of Contents
INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY... -
Page 3: Installation Tools
Ladder Parts List Make sure that none of these parts are missing and/or damaged before beginning installation. If there are, stop the installation and call Premier Mounts at (800) 368-9700. ECM-D70T Mount Hardware Elliptical Tlit Mount (Qty 1) Decorative Covers (Qty 4) -
Page 4: Mounting Hardware
M6 x 25mm Phillips Head Screw (Qty 12) Griplate™ M6 x 30mm Phillips Head Washers (Qty 16) Screw (Qty 12) M6 x 45mm Phillips Head Screw (Qty 12) Universal Spacers (Qty 48) Page 4 Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com... -
Page 5: Features
ECM-D70T / ECM-D70T1.5 Features The ECM-D70T / ECM-D70T1.5 ceiling mount fits dual flat-panels up to 50” in either portrait or landscape orientation. It offer dynamic viewing with 360° swivel and 15° of tilt. The mount’s ultra-thin design keep s the center of gravity close to the flat-panels for better balance. - Page 6 (4) complete turns. Step 2 Once the ECM-D70T has been firmly threaded to the 1-½ ״or 2” NPT threaded pipe, use a screwdriver to tighten the Phillips set screw on the threaded coupler. Ensure that all connections are secure and tight before proceeding to the next step.
-
Page 7: Selecting The Appropriate Mounting Hardware
Proceed to the “Griplate™ Washer Installation” section. Small Straw Depth Plus 1/8” Allowance Small Straw Depth Plus 1/8” Allowance or Toothpick or Toothpick Mark Mark Installation Instructions Page 7 Visit the Premier Mounts website at http://www.premiermounts.com... -
Page 8: Griplate™ Washer Installation
If No, skip to the “Flat Panel Installation” section. Flat Panel Nylon Spacer Nylon Spacer Installation Premier Mounts’ nylon spacers allow you to attach the Mount Point mounting bracket to flat-panels which have recessed or uneven mount points. Each nylon spacer will add distance between the mounting bracket and your flat- panel. -
Page 9: Flat-Panel Installation
ECM-D70T / ECM-D70T1.5 Flat-Panel Installation Step 1 Install the mount according to the instructions provided by Premier Mounts. Perform all structural reinforcements before attaching the flat-panel to the ceiling mount. Do not release the flat-panel until the mounting bracket arms are fully resting on the elliptical mounting bar. -
Page 10: Cable Management
The cables must then be routed through the coupler, up the ceiling adapter (not included) and into the ceiling to To Ceiling a pre-determined source. Ceiling Adapter Coupler Source or A/V Cable Page 10 Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com... -
Page 11: Tilt Positioning
Optional Mounting Configurations and Accessories The ECM-D70T is designed for use with either a standard piece of 1-½˝ NPT or 2” pipe, or any the following ceiling mount adapters from Premier Mounts. Please refer to the ceiling mount adapter installation instructions when mounting. Please contact Premier Mounts at (800) 368-9700 with any questions. -
Page 12: Technical Specifications
ECM-D70T / ECM-D70T1.5 Technical Specifications All measurements are in inches(mm). 80.17 3.156 1778 70.000 85.15 845.96 3.352 33.306 195.47 7.696 548.77 21.605 38.10 1.500 63.50 2.500 Page 12 Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com... -
Page 13: Warranty
What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs.
Need help?
Do you have a question about the ECM-D70T and is the answer not in the manual?
Questions and answers