4.2.1. Device settings
This menu contains system parameters to display and configure the switch to your network.
Menu items are:
Version (RO):
●
MAC Address (RO):
●
System Up Time (RO):
●
System Name:
●
System Location:
●
System Contact:
●
IP Address:
display and set the IP address of MGSW-2402
●
Subnet Mask:
●
Default Gateway:
●
Change User/Password:
●
Console Login Enabled:
●
Quit:
logout on MGSW-2402
●
4.2.2. Port Settings
Select any one port, the menu contains ten items for port management will shown up as
below:
•
Link (RO):
display the link state(UP/DOWN) of per port on MGSW-2402
•
Speed/Duplex (RO):
•
Port Enabled:
Figure 4-1 The Main Menu of Console Management
display the firmware version of MGSW-2402
display the MAC Address of MGSW-2402
display the work time of MGSW-2402
display and change the system name of this Switch
display and set the location of this Switch
display and set the administrator of this Switch
display and set the Subnet Mask of MGSW-2402
display and set the gateway of MGSW-2402
allow to set the User name and password, default value is root
provide enable or disable Console login MGSW-2402
Figure 4-2: Device settings
display the Speed/Duplex of the device connect to the port
allow enable or disable the port of MGSW-2402
- 23 -