• Speed/Duplex:
duplex
• Flow Control:
allow enable or disable flow control on each port
• Back Pressure:
•
VLAN Tagged:
•
Default VLAN ID:
•
Note:
set and display the information of each port
• Quit:
back to previous menu
4.2.3. Address Table
This menu contains four items for MAC address record on each working port
All
●
Module
●
Module Port
●
Quit
●
4.2.4. Spanning Tree Protocol
This menu contains three items to enable or disable STP:
Enable
●
Disable
●
Quit
●
allow set Auto- negotiation,100Mbps-full/half duplex,10Mbps-full/half
allow enable or disable Back Pressure on each port
allow enable or disable VLAN Tagged on each port
allow set VLAN ID 1~4095 on each port
Figure 4-3: Port Settings
Figure 4-4: Address Table
- 24 -