Console Interface; Connect To Pc; Main Menu - Planet MGSW-2402 User Manual

4.1 CONNECT TO PC

RS-232 serial cable
Prepare a RS-232 serial cable. Attach the 9-pin female connector to the male connector on
the switch. Plug the other side of this cable to your PC.
Hyper Terminal
In Windows 95/98/2000/XP,launch "HyperTerminal", create a new connection, and adjust
settings as below:

4.2 Main Menu

The main menu displays all the sub-menus that are available. Striking Enter, at a highlighted
option, will confirm the choice of the specified sub-menu. As shown in Figure 4-2, there are
thirteen menu items to choose from:
Device Settings
●
Port settings
●
Address Table
●
Spanning Tree Protocol
●
Broadcast Storm Filter
●
IGMP
●
VLAN Mode (2 modes)
●
VLAN for CPU (2 VLANs)
●
Secure IP for Telnet and HTTP
●
Save Current Settings
●
Factory Default Settings & Reboot System
●
Reboot System
●
Quit
●

4 CONSOLE INTERFACE

- 22 -