Set-up: Using PC
5
Connect the Meter to the Computer
Connect the USB cable to the back of the meter.
Connect the other end of the cable to the PC.
NOTE: For printing postage, the mailstation 2
be connected to a computer. However, if you add funds frequently,
we recommend you keep it connected.
6
Connect Power
Plug the power cord into the unit as shown and into a convenient
outlet that is not controlled by a switch or power strip.
There is no On/Off switch on your meter.
The meter takes a few moments to start up. Then the computer
tells you when it can communicate with the meter.
does not have to
™
3