Troubleshooting - Pitney Bowes MAILSTATION 2 Quick Install Manual

Troubleshooting

No Dial Tone-
Check that you are using an analog line such as
a) most fax machine lines
b) lines used by computer modem or credit card reader
c) residential phone lines
Check that you have entered a dialing prefix if your phone
system needs a code to reach an outside line.
If you are using a DSL line you should use a DSL filter obtained
from your DSL provider.
Cannot Reach Data Center-
Check that you have entered a dialing prefix if your phone
system needs a code to reach an outside line.
Not Enough Funds-
You have tried to add more postage to the meter than you have in
your account at Pitney Bowes.
To Change information entered during setup -
• Press Clear key on numeric keypad.
• When prompted to Quit press
• At "Change communication settings?" press
• Press the down arrow key until you see the item you want to modify.
• Press Enter
• To return to installing your mailstation 2
until "Continue Installation?"
• Press yes
For additional Troubleshooting please see user guide
to modify information.
yes.
yes.
,press the up or down arrow
™