C.Plath NAVIGAT X MK 1 Mod. 10 Operator's Manual page 57

NAVIGAT X MK 1 Mod. 10 / SR-180 MK 1 Mod. 10
37) Place the gyrosphere container into the
compass housing with the pointer located
directly below the tongue of the bellows.
38) Put both hands around the container and
lift it into the bellows. Turn the container
to the left until the coupling engages.
39) While supporting the countainer with the
palms, put the thumbs on the rim of the
bellows and press together bellows and
container. With the thumbs, turn the bel-
lows to the left to lock the coupling.
40) Connect the plug to the socket on the
gyrosphere container.
41) Put the door in front of the housing and
connect the grounding strap. Connect the
control and display unit to the masterboard
(plug connector J3).
42) Fit the door on the housing and tighten
the retaining screws.
056310
3-149 MK110ENG.P65
Page 5-13