C.Plath NAVIGAT X MK 1 Mod. 10 Operator's Manual page 38

NAVIGAT X MK 1 Mod. 10 / SR-180 MK 1 Mod. 10
Gyrocompass Data Input Format (Gyro Input)
Settings:
Function:
Note:
Magnetic Compass Data Input Format (Mag Hdg Inp.)
Settings:
Function:
Note:
Speed Data Input Format (Speed Input)
Settings:
Function:
Note:
Position Data Input Format (Pos Input)
Settings:
Function:
Note:
Page 4-08
PLATH = Plath-format
LEHMKUHL LR 40 = Lehmkuhl-LR 40-format
LEHMKUHL LR 20 = Lehmkuhl-LR 20-format
NMEA HDT = NMEA sentence $..HDT
OFF = Interface disabled
Selects the input data format of the gyrocompass interface.
If no second gyrocompass is connected to the system, the gyrocom-
pass interface must be set to OFF. Accordingly, the system type must
be set to G or GM.
SIN COS = fluxgate-sensor, sin/cos-type
NMEA HDM = NMEA sentence $..HDM
PLATH-MAGN = Plath-format
OFF = Interface disabled
Selects the input data format of the magnetic compass interface.
If no magnetic compass is connected to the system, the magnetic com-
pass interface must be set to OFF. Accordingly, the system type must
be set to G or GG.
200 Pulse/NM = pulse log, 200 pulses/nm
NMEA-VHW = NMEA sentence $..VHW
NMEA-VTG = NMEA sentence $..VTG
NMEA-VBW = NMEA sentence $..VBW
Selects the input data format of the speed interface.
In order to receive speed data via the speed interface, speed mode
"auto" must be selected in the manual settings menu.
NMEA-GLL = NMEA sentence $..GLL
NMEA-GGA = NMEA sentence $..GGA
Selects the input data format of the position interface.
In order to receive position data via the position interface, latitude mode
"auto" must be selected in the manual settings menu.
056310
3-149 MK110ENG.P65