Setup Menu - User Setup; Date/Time; Software Version; Magnetic Compass Calibration Table - C.Plath NAVIGAT X MK 1 Mod. 10 Operator's Manual

NAVIGAT X MK 1 Mod. 10 / SR-180 MK 1 Mod. 10
2.5 Setup Menu – User Setup
The "User Setup" menu provides acces to the internal clock, software version data
and the magnetic compass calibration table.
2.5.1

Date/Time

Settings:
Function:
Note:
2.5.2

Software Version

Function:
2.5.3

Magnetic Compass Calibration Table

Settings:
Function:
Day/Month/Year
Hours/Minutes
Sets the internal clock. Date and time information is accessible via the
display data menu. If a voyage data printer NAVIPRINT is connected to
the compass system, the internal clock provides the time reference for
the printer.
The internal clock is not backed up by a battery. After any interruption
of power, date and time must be reset by the operator.
Displays the version numbers of the control unit's and the masterboard's
software respectively.
ON = calibration active
OFF = no calibration
heading display values: 0.0 – 359.9°
correction values: -99.9° – +99.9°
Selects between the calibrated/uncalibrated display of the magnetic
compass heading and provides access to the magnetic compass cali-
bration table.
For a description of the magnetic compass calibration procedure, see
section 4.5.
056310
3-149 MK110ENG.P65
Page 2-11