Supermicro A2SAP-L1 User Manual page 78

Super A2SAP-L1 User's Manual
Default Options
Restore Defaults
To set this feature, select Restore Defaults from the Exit menu and press <Enter>. These are
factory settings designed for maximum system performance but not for maximum stability.
Save as User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This
enables you to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use
this feature to retrieve user-defined settings that were saved previously.
Boot Override
This feature allows you to override the Boot priorities sequence in the Boot menu, and
immediately boot the system with a device specified by the user instead of the one specified
in the boot list. This is a one-time override.
UEFI: Built-in EFI Shell
UEFI: IP4 Intel(R) I210 Gigabit Network Connection-0025905ee2d4
78