Security - Supermicro A2SAP-L1 User Manual

4.4 Security

Use this menu to configure Security settings.
Password Check
Use this feature to determine when a password entry is required. Select Setup to require the
password only when entering setup. Select Always to require the password when entering
setup and at each bootup. The options are Setup and Always.
Setup Administrator Password
Use this feature to set the administrator password which is required to enter the BIOS setup
utility. The length of the password should be from three to 20 characters long.
 Secure Boot
•
System Mode
•
Secure Boot
•
Vendor Keys
Secure Boot Support
Use this feature to enable or disable secure boot support. The options are Enabled and
Disabled.
71
Chapter 4: BIOS