Installation
5.4.3
Remove the cabinet from the pallet
Preliminary requirements
Procedure
1. Remove the fasteners (A).
2. Discard the fasteners and the pallet.
Refer to section
5.5
Mechanical installation
5.5.1
Mechanical installation procedure
Preliminary requirements
Procedure
1. Open the cable inlet and remove the cable gland. Refer to section
2. Guide the cables through the openings in the cable guide plate. Refer to section
5.5.3
3. Install these parts:
1. Cabinet on the foundation. Refer to section
2. Border covers. Refer to section
5.5.2
Open the cable inlet and remove the cable gland
Preliminary requirements
28
•
Open spanner
3.9
.
1.
The cabinet is above the foundation.
.
•
Open spanner
5.5.4
.
6.4
.
A
5.5.2
.
BCM.S1102.0-EN | 001