Personal Protective Equipment; Safety Instructions During Installation - ABB Terra 94 Installation Manual

Safety
• The qualified installation engineer obeys all local rules and the instructions in
the installation manual.
• It is the responsibility of the owner of the EVSE to make sure that all qualified
installation engineers obey the local rules, the installation instructions, and the
specifications of the EVSE.
3.4

Personal protective equipment

Symbol
3.5

Safety instructions during installation

Preliminary requirements
• Do not use adaptors or conversion adapters.
• Do not use cord extension sets.
• Make sure that there is no voltage on the AC input cables during the complete
installation procedure.
• Keep unqualified personnel at a safe distance during installation.
• Only use electrical wires of sufficient gauge and insulation to handle the rated
current and voltage demand.
• Make sure that the load capacity of the grid is in accordance with the EVSE.
• Earth the EVSE correctly. Refer to section
• Make sure that the wiring inside the EVSE is protected from damage and cannot
get trapped when you open or close the cabinet.
• Make sure that water cannot enter the cabinet.
• Protect the EVSE with safety devices that the local rules specify.
20
Description
Protective clothing
Safety gloves
Safety shoes
Safety glasses
1. •
3.7
.
BCM.S1102.0-EN | 001