Transport; Transport The Evse To The Site; Transport The Evse On The Site; Hoist The Cabinet - ABB Terra 94 Installation Manual

4

Transport

4.1

Transport the EVSE to the site

A transport company delivers the EVSE close to the site. The movement of the EVSE
to its final location is your responsibility.
• If you need to store the EVSE before installation, obey the ambient conditions
for storage. Refer to section
4.2

Transport the EVSE on the site

4.2.1

Hoist the cabinet

Preliminary requirements
Procedure
1. Install the swivel eye bolts or bolts
with lifting loops (A).
2. Connect the cables (B) of the hoisting
equipment to the swivel eye bolts or
bolts with lifting loops.
3. Move the cabinet to the correct
location.
BCM.S1102.0-EN | 001
1. The cabinet is unpacked.
5.4.1
Refer to section
Note:
Risk of pinching or crushing, the cabinet is heavy
• Make sure that the hoisting equipment can lift the cabinet safely.
Obey the safety instructions that apply to the hoisting equipment.
Take into account the dimensions, the mass and the center of gravity
of the EVSE. Refer to chapter
Caution:
• Do not drop the cabinet.
• Do not tilt the cabinet more than allowed. Refer to section
8.6
.
•
.
8
.
B
A
Transport
Hoisting equipment,
including cables, swivel eye
bolts or bolts with lifting
loops. Refer to section
8.9
.
8.4
.
23