Table of Contents
Advertisement
Reference Manual
00809-200-4245
3
Installation
3.1
Unloading/Unpacking
HEAVY ITEM
Serious injury or death could occur.
The leak detection system weighs 1250 kg (2756 lb) and should only be lifted or moved by
a minimum of two people using suitably rated lifting/moving equipment.
To prevent crushing of hands, feet, or other body parts always wear suitable protective
gloves and footwear when handling.
The selected installation site must be suitable to support the weight of the leak detection
system, cabling and gas sample lines when installed.
3.1.1
Unloading
Make sure that unloading personnel are qualified and properly equipped for your particular
unloading situation. Don't attempt to use a forklift truck if you really require a crane!
Twisted frames are difficult to repair. Use the correct rigging slings and lifting equipment to
avoid any frame twisting. Use lifting sling and chain spreaders to avoid compressing or
bending portions of the conveyor.
Immediately upon arrival of your shipment, inspect the outside carton or skid for damage.
Open the box and inspect for missing items. If your shipment is flawed, stop unloading
and request immediate inspection by the carrier. Take exception on the delivery receipt by
including damage description words; for example, "2 cartons gouged" or "corners
crushed". Take photos and keep any original containers on hand for carrier inspection, or
it becomes very difficult to get your damages reimbursed.
Reference Manual
WARNING
On receipt of goods, inspect the Tip N Tell and
ShockDot labels fitted to the outside of the
shipping container.
Tip N Tell White arrow becomes blue when tilted
80° from vertical.
Shock Dot indicator turns red when a potentially
damaging impact has occurred.
The labels will alert the customer to any
mishandling of the analyzer when in transit.
Installation
April 2022
19
Advertisement
Table of Contents
