Start Up Procedure; Before You Begin; Prior To Startup - Emerson ROSEMOUNT HMC-C01 Reference Manual

Compression sample head
Table of Contents

Advertisement

Reference Manual
00809-200-4245
4

Start Up Procedure

HIGH PRESSURE AIR
Serious injury or death could occur.
The compressed air supply operate at pressures that can cause injury.
AIR SUPPLY
Minor or moderate injury will or could occur
Air provided must be connected from a pressure regulated clean, filtered and moisture free
supply source.
HEAVY ITEM
To stop the start-up procedure at any time, set the main circuit breaker to OFF.
4.1

Before You Begin

Remove all outside encumbrances from the area around the conveyor Secure the
conveyor to its location
4.1.1

Prior To Startup

All guard doors must be closed and latched. There are two guard doors, one on either
side of the conveyor. The conveyor will not start if the doors are not latched properly.
Reference Manual
WARNING
CAUTION
NOTICE
Start Up Procedure
April 2022
27

Advertisement

Table of Contents
loading

Table of Contents