Table of Contents
Advertisement
Reference Manual
00809-200-4245
1
System overview
The HMC-C01 compression sample head is a system which uses 2 conveyors to
compress MAP filled packages in order to squeeze the MAP gas out of any defect in the
package. The MAP gas is then sampled through sampling points placed at the sides, top,
and/or bottom of the package depending on the specific application.
The compression head is designed to be installed alongside the CM-01 base leak
detection system. Please refer to reference manual 00809-0100-4245 for details on the
base unit installation. This document is intended for the personnel who install, operate,
and maintain the detector.
The compression head is designed to be installed as a slot in solution on an existing or
new production line. The main components of the system are summarized below.
A.
B.
C.
Reference Manual
Base Conveyor
System Enclosure Containing Compression Conveyor
Enclosure Purge Fan
System Overview
April 2022
13
Advertisement
Table of Contents
