ADJ VIZI WASH Z37 User Manual page 26

S Y S T E M M E N U
Information (continued)
Fixture Temps
Select Fixture Temps, then press the ENTER button to confirm. Use the UP/DOWN button to select
LEDs, or Reset LED Temp, then press the ENTER button to store. Press the MENU button to move
back to the last menu, or let the unit idle one minute to exit menu mode.
Fan Info.(RPM)
Select Fan Info.(RPM), then press the ENTER button to confirm. Use the UP/DOWN button to select
LED Fan1, LED Fan2, LED Fan3, Head Fan, Base Fan1, or Base Fan2, then press the ENTER button
to store. Press the MENU button to move back to the last menu, or let the unit idle one minute to exit
menu mode.
DMX Value
Select DMX Value, then press the ENTER button to confirm. Use the UP/DOWN button to select Pan,
Tilt, ..., Special Function, then press the ENTER button to store. Press the MENU button to move back
to the last menu, or let the unit idle one minute to exit menu mode.
Error Logs
Select Error Logs, then press the ENTER button to confirm. Use the UP/DOWN button to select Fixture
Errors, or Reset Error Log, then press the ENTER button to store. Press the MENU button to move
back to the last menu, or let the unit idle one minute to exit menu mode.
Max Temp LED ON
Select Max Temp LED ON, then press the ENTER button to confirm. Use the UP/DOWN button to
select 32~169°F, 102°F / 0~76°C, 39°C, then press the ENTER button to store. Press the MENU
button to move back to the last menu, or let the unit idle one minute to exit menu mode.
High Temp LED OFF
Select High Temp LED OFF, then press the ENTER button to confirm. Use the UP/DOWN button
to select 170°F, 100°F / 77°C, 38°C, then press the ENTER button to store. Press the MENU button
to move back to the last menu, or let the unit idle one minute to exit menu mode.
Software Version
Select Software Version, then press the ENTER button to confirm, present mode will show on the
display. Press the MENU button to exit.
26