Please turn off all electrical products when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank you! ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 26...
Page 3
The Zipper is a DMX intelligent LED quad barrel roller. The Zipper has three operating modes; a sound active, show mode, DMX controlled. The Zipper has 3 DMX mode; 1 channel mode, 3 channel mode, and 11 channel mode. The Zipper can operate as a stand alone fixture or in a Master/Slave configuration.
Page 4
• UC IR Compatiable (Sold Separately) Zipper Warranty Registration The Zipper carries a 2 year (730 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase and warranty. You may also register your product online at www. americandj.com.
ADJ Products, LLC Service Department at 800-322-6337. Send the pro- • Do not attempt to operate this unit if the power cord has been duct only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs frayed or broken.
Operation): The Zipper can be controlled via DMX-512 protocol. The you may encounter, with solutions. Zipper has 3 DMX modes. The DMX address is set electronically using No light output from the unit; the controls on the rear panel of the unit. Your unit and your DMX controller require a approved DMX-512 110 Ohm Data cable for data 1.
Page 8
Pin 3 Not Used Pin 4 - Do Not Use Not Used Pin 5 - Do Not Use ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 7 ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 20...
Page 9
STROBING SLOW - FAST 132 - 139 OPEN 140 - 181 SLOW OPEN - FAST CLOSE 182 - 189 OPEN ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 19 ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 8...
Page 10
NOTE: In a Master/Slave configuration you can set one fixture 248 - 255 OPEN to Master and then set the next fixture to “SL 2”, the fixtures ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 18 ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 9...
Page 11
2. A number between 0-100 will be displayed. Press the UP or DOWN buttons to adjust the sound sensitivity. 0 being the least ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 17 ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 10...
Page 12
1. Press the MENU button until “DIND” is displayed, press ENTER. 2. The current dimmer curve setting will be displayed. ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 11 ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 16...
ENTER. See page 10 for more info. Tilt inversion, select NO and press Enter. 5. The slave units will now follow the Master unit. ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 15 ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 12...
Page 14
A DMX controller allows you to create unique programs tailored to your individual needs. 1. The Zipper has 3 DMX Modes. See pages 17-20 for detailed - With this function you can display the software ver- description of the DMX modes, values, and traits.