Table of Contents
Advertisement
S Y S T E M M E N U
MAIN MENU
OPTIONS / VALUES (Default Settings in BOLD)
DMX Address
DMX Channel
Mode
DMX Settings
No DMX Status
Status Settings
Personality
Fan Settings
Dim Modes
Dim Curve
Reset Motors
Display
ADJ VIZI WASH Z37 - SYSTEM MENU
Default setting shown in bold
001 - 512
14ch, 15ch, 17ch, 18ch, 19ch, 38ch,
39ch, 72ch, 73ch
Hold Last
Blackout
Int Program
Manual
ON / OFF
Pan Invert
Tilt Invert
ON / OFF
P./T. Feedback
ON / OFF
Speed 1, Speed 2
P./T. Speed
OFF, 01M~99M, 15M
Hibernation
Auto, High, Silent
Head
Auto, High, Silent
Base
Standard, Stage, TV, Architectural,
Theatre, Stage 2
Dim Speed
0.1S~10S
Square Law, Linear, Inv SQ Law, S.Curve
YES / NO
Reset All Motors
YES / NO
Pan/Tilt Reset
Zoom Reset
YES / NO
Intensity
1-10
YES / NO
Display Invert
Screen Saver Delay OFF - 10 minutes
ON / OFF
Lock On/Off
18
DESCRIPTION
Shall be used to set the units starting DMX
address channel. Depending on set DMX
mode, unit shall not allow to be addressed
any higher that will not allow for all
channels to be accessed from the console.
Shall be used to set the units desired DMX
mode.
Shall be used to set the units behavior
when DMX signal is not present. Hold shall
be the default setting and unit shall hold
all last channel values received from the
console when signal is lost.
Blackout option shall take all channels to
zero (0) when signal is lost.
Manual Settings option shall take all
channels to the last set Manual channel
settings when signal is lost.
Speed 1 (Default) should allow unit to move
at its fastest possible speed without losing
step. Speed 2 should be for more smooth
precise movements so naturally this would
be slower movements compared to Speed 1
When DMX signal is not present for the set
time, the unit shall go into standby mode
after the set time. When set to OFF, unit
shall never go into hibernation mode. The
unit should have 01M to 99M options... so
01M, 02M, 03M... 99M (M=Minutes). 15M
should be default.
Preset dim modes... see Dim Modes Tab
for details.
Set your own dim delay versus smooth
dimming. 0.1s is the least delay, and 10s is
the most delay.
Advertisement
Table of Contents
