ADJ VIZI WASH Z37 User Manual page 25

S Y S T E M M E N U
Internal Programs (continued)
Program 3
Select Program 2, then press the ENTER button to confirm. Use the UP/DOWN button to select
Speed or Fade, then press the ENTER button to store. Press the MENU button to move back to the
last menu, or let the unit idle one minute to exit menu mode.
Program 4
Select Program 4, then press the ENTER button to confirm. Use the UP/DOWN button to select
Speed or Fade, then press the ENTER button to store. Press the MENU button to move back to the
last menu, or let the unit idle one minute to exit menu mode.
Target Mode
Select Target Mode, then press the ENTER button to confirm. Use the UP/DOWN button to select
Mode 0, Mode 1, Mode 2, Mode 3, or Mode 4.
Mode 0
Select Mode 0, then press the ENTER button to confirm. With this selection, the Pan movement
range is 540°, and the Tilt movement range is 270° (see Target Modes on page 27). Press the
MENU button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Mode 1
Select Mode 0, then press the ENTER button to confirm. With this selection, the Pan movement
range is 90°, and the Tilt movement range is 135° (see Target Modes on page 27). Press the MENU
button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Mode 2
Select Mode 2, then press the ENTER button to confirm. With this selection, the Pan movement
range is 90°, and the Tilt movement range is 135° (see Target Modes on page 27). Press the MENU
button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Mode 3
Select Mode 3, then press the ENTER button to confirm. With this selection, the Pan movement
range is 90°, and the Tilt movement range is 135° (see Target Modes on page 27). Press the MENU
button to move back to the last menu, or let the unil idle one minute to exit menu mode.
Mode 4
Select Mode 4, then press the ENTER button to confirm. With this selection, the Pan movement
range is 90°, and the Tilt movement range is 135° (see Target Modes on page 27). Press the MENU
button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Information
Select Information, then press the ENTER button to confirm. Use the UP/DOWN button to select
Fixture Life Time , Total LED Time, Fixture Temps, Fan Info, DMX Values, Error Logs, Max Temp
LED ON, High Temp LED OF, or Software Version.
Fixture Life Time
Select Fixture Life Time, then press the ENTER button to confirm. Use the UP/DOWN button to select
Power On Time, P-On Time-R, or P-On Time Reset, then press the ENTER button to store. Press the
MENU button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Total LED Time
Select Total LED Time, then press the ENTER button to confirm. Use the UP/DOWN button to select
LED on Time, LED On Time-R, or LED On Time Reset, then press the ENTER button to store. Press
the MENU button to move back to the last menu, or let the unit idle on minute to exit menu mode.
25