ADJ VIZI WASH Z37 User Manual page 24

S Y S T E M M E N U
Personality (continued)
Service
Select Service, then ress the ENTER button to confirm; the present mode will show on the display.
Press the MENU button to exit. Use the UP/DOWN button to select Calibration, USB Port Power,
Update Software, or Factory Restore.
Calibration
Select Calibration, then use the UP/DOWN buttons to select Pan, Tilt, Zoom; with any selection,
use the UP/DOWN button to adjust the value from -128 to 127; then use the UP/DOWN button to
select Red, Green, Blue, White, Red1, Green1, Blue1, White1, ..., Red11, Green11, Blue11,
White11, then use the UP/DOWN button to adjust the value 125 to 255.
USB Port Power
Select USB Port Power, then use the UP/DOWN button to select On or Off. Press the MENU
button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Update Software
When selecting Update Software, the present mode will show on the display. Press the MENU
button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Factory Restore
Select Factory Restore, then use the UP/DOWN button to select Yes or No. Press the MENU
button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Manual Control
Select Manual Control, then press the ENTER button to confirm. The present channel will show on
the display. Use the UP/DOWN button to select Pan, Pan Fine, Tilt, Tilt Fine, Red1-11, Green1-11,
Blue1-11, White1-11, Color Macros, Base Color, Block Macro, Shutter, Dimmer, Dimmer Fine,
Zoom, Zoom Fine, Macro Speed, or P/T Speed, then press the ENTER button to confirm. Use the
UP/DOWN button to adjust the value 000 to 255, then press the ENTER button to store. The fixture
will run as the channel value indicates. Press the MENU button to move back to the last menu, or exit
menu mode idling one minute. Note that all channel values default to 0 after exiting Manual Test menu.
Internal Programs
Select Internal Programs, then press the ENTER button to confirm. Use the UP/DOWN button to
select Program 0, Program 1, Program 2, Program 3, or Program 4.
Program 0
Select Program 0, then press the ENTER button to confirm. Use the UP/DOWN button to select
Speed or Fade, then press the ENTER button to store. Press the MENU button to move back to the
last menu, or let the unit idle one minute to exit menu mode.
Program 1
Select Program 1, then press the ENTER button to confirm. Use the UP/DOWN button to select
Speed or Fade, then press the ENTER button to store. Press the MENU button to move back to the
last menu, or let the unit idle one minute to exit menu mode.
Program 2
Select Program 2, then press the ENTER button to confirm. Use the UP/DOWN button to select
Speed or Fade, then press the ENTER button to store. Press the MENU button to move back to the
last menu, or let the unit idle one minute to exit menu mode.
24