ADJ VIZI WASH Z37 User Manual page 13

I N S TA L L AT I O N G U I D E L I N E S
OMEGA BRACKETS INSTALLATION
Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the Omega
Brackets to the fixture by turning each quick-lock fastener ¼ turn clockwise; making sure the fastener is
completely locked. Omega Brackets can be installed into the fixture base as illustrated below.
CLAMP INSTALLATION
When mounting fixture to truss, be sure to secure an appropriately rated professional grade rigging
clamp to the included Omega Brackets using an M12 screw fitted through the center hole of the
Omega Brackets. The fixture provides built-in rigging points for a SAFETY CABLE (not included). Be
sure to only use one of the designated rigging points for the safety cable and never secure a safety
cable to a carrying handle.
ALWAYS ATTACH A SAFETY
WHENEVER INSTALLING THIS
FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE
THE FIXTURE WILL NOT FALL
IF THE CLAMP FAILS.
13
S A F E T Y C A B L E