Chapter 7 Audio Setup
7.1 Introduction
The IPPC-9120G/9150G's on-board audio interface provides high-quality
stereo sound and FM music synthesis (ESFM) by using the VIA
VT82C686 audio controller from VIA. The audio interface can record,
compress, and play back voice, sound, and music with built-in mixer con-
trol.
The IPPC-9120G/9150G on board audio interface also supports the Plug
and Play (PnP) standard and provides PnP configuration for the audio,
FM, and MPU-104 logical devices. It is compatible with Sound
Blaster™; Sound Blaster Pro™ version 3.01, voice and music functions.
The ESFM synthesizer is register compatible with the OPL3 and has
extended capabilities.
7.2 Installation of the Audio Driver
Before installing the audio driver, please take note of the procedures
detailed below. You must know which operating system you are using in
your IPPC-9120G/9150G, and then refer to the corresponding installation
flow chart. Just follow the steps in the flow chart. You can quickly and
successfully complete the installation, even though you are not familiar
with instructions for Windows.
Notes:
IPPC-9120G/9150G Users Manual
1. The windows illustrations in this chapter are
intended as examples only. Please follow the
listed steps, and pay attention to the instructions
which appear on your screen.
2. For convenience, the CD-ROM drive is desig-
nated as "D" throughout this chapter.
3. <Enter> means pressing the "Enter" key on
the keyboard.
58